source:truck tracking webfleet solutions release time:2022-10-14 Hits: Popular:realtime gps tracker online
The basic principle of GPS positioning is based on the instantaneous calculation data of the instantaneous position of the high -speed movement, and the method of the space distance is used to determine the location of the test point. As shown in the figure, assuming that when T is placed on the ground to be placed on the ground at the ground, the GPS receiver can be measured, and the time for the GPS signal to reach the receiving machine △ T, plus other data such as the satellite star calendar received by the receiver can determine the following four four. Formula:
In the above four equations, the measuring point coordinates X, Y, Z, and VTO are unknown parameters, where DI = C △ TI (i = 1, 2, 3, 4).
DI (i = 1, 2, 3, 4) is satellite 1. Satellite 2, satellite 3. Satellite 3. Satellite 3, satellite 4 to receiver.
△ TI (i = 1, 2, 3, 4) is the time of satellite 1. Satellite 1. Satellite 2, satellite 3, and satellite 4.
C is the speed of transmission of GPS signal (ie, the speed of light).
The meaning of each parameter in the four equations is as follows:
X, Y, Z are the spatial right -angle coordinates of the coordinates to be tested.
XI, Yi, Zi (i = 1, 2, 3, 4) are satellite 1. Satellite 2, Satellite 3, Satellite 4 in the right -angle coordinates of the space at the time of T.
VT I (i = 1, 2, 3, 4) The bells of satellite clocks with satellite 2, satellite 2, satellite 3, and satellite 4 are provided by the satellite star calendar.
VTO is the bell of the receiver.
From the above four equations, the clock difference of the coordinates X, Y, Z and the receiver of the coordinates to be measured at the above four equations.
GPS satellite sends its own star parameters and time information. Under the independent GPS mode, the positioning terminal receives the information through the antenna from the GPS satellite, and the three -dimensional position, three -dimensional direction and motion speed and time information of the receiving machine are calculated. Because satellites are directly broadcasting from high -altitude, the signal is weak and the transmission rate is slow. This gives the positioning terminal a certain problem.
Read recommendations:
High precision timing system based on GPSD
Buses equipped with GPS for private use should be held accountable
Last article:The GPS implementation plan has three phases
Next article:Installation of GPS navigator
Related Information
gps vehicle tracker custom
2023-04-11pet gps tracker cat distributors
2023-03-16gps vehicle tracker
2023-04-11simple gps tracking
2023-04-11pet gps tracker cat custom
2023-04-234G GPS Tracker wholesale
2023-04-23Cantrack GT06
2023-04-23real-time gps tracking supplier
2023-04-23gps vehicle tracker wholesaler
2023-04-234G GPS Tracker for vehicles
2023-03-16G500L -4G OBD GPS Tracker
2022-09-06G02M Pet Tracker
2022-06-19VSL100 GPS Speed Limiter, Speed Governor
2022-06-19TK100N- Multi functional GPS Tracker
2023-10-06NB20 -4G Bluetooth Smart Pet Tracker
2022-06-21Car GPS locator.gps tracker with magnet sales
2023-06-20GPS navigation function
2022-07-21GPS satellite positioning
2023-02-15The manufacturer summarizes all the functions of the monitoring system
2023-05-09The significance of GPS positioning technology in the construction machinery industry.GPS Rastreader
2023-03-16The hidden installation location of the wireless car GPS positioner.plug & play Obd gps tracker
2023-03-28GPS wireless communication transmission
2023-02-01GPS application in agriculture.realtime gps tracker online manufacture
2023-04-24GPS cooperation for multiple wins.mini gps tracker
2023-09-23GPS Application Solution
2022-10-09The GPS implementation plan has three phases
2022-10-13GPS classification and usage.gps vehicle tracker company
2023-07-14Which vehicles are the on-board GPS locator terminals applied to.gps vehicle tracker
2023-10-07GPS Mobile Positioning Technology
2022-11-24GPS application in wild animals.gps tracker no monthly fee manufacturer
2023-04-24