source:truck tracking webfleet solutions release time:2022-12-08 Hits: Popular:realtime gps tracker online
The working mode of GPS positioning system is to use the basic triangulation positioning principle of satellite. The GPS receiver first finds the location of more than three satellites, and then calculates the distance between each satellite and the receiver to obtain the coordinates of the receiver in three-dimensional space. More than 20 satellites of the GPS system will transmit signals with L1 and L2 frequencies of 1575.42MHz and 1227.60MHz respectively. Generally, GPS receivers for civil use only need to receive L1, that is, 1575.42MHz frequency signals.
The GPS device at the customer receiving end will receive the positioning signal from the navigation satellite, which is a one-way GPS signal receiver. First of all, the GPS antenna will first receive GPS satellite signals, and then convert high-frequency signals into medium and low-frequency digital signals through the RF RF front end and transmit them to the GPS baseband module. The core technology of baseband is the design of correlator. The correlator is mainly used to compare and find the correct satellite number, and then obtain the Almanac, BroADCast Ephemeris and other data of multiple satellites by comparison. The more channels of the correlator, the faster the satellite position can be found. At present, general GPS receivers provide at least 12 channel correlators, while higher order receivers have 16 or even 32 channel correlators.
The control function of GPS receiver is realized by microprocessor or microcontroller. The processor can be an independent unit or integrated with baseband. At present, low-end GPS receiver products usually use ARM7 as the core; High end products are generally ARM9. In addition, such components will also have microprocessor support functions, such as UART and Real Time Clock (RTC).
The broadcast ephemeris data will be output to the main processor in NMEA 0183 or RTCM format, and further integrated with the GIS map engine to display the location of the street; It can also send location information through the wireless communication interface, so that remote servers can further provide relevant location services. NMEA 0183 is a standard communication protocol commonly used by GPS. It uses simplified ASCII serial communication protocol to define the format of data transmission.
The WAAS system in the United States or the EGNOS system in Europe adopt the auxiliary positioning mode of differential positioning (DGPS). When GPS adopts this mode, RTCM or NTRIP 1.0 protocol format should be output.
In addition, since the original data formats provided by different receivers are usually different, a universal GPS data exchange format must be established to uniformly process the data collected by different receivers. At present, the format commonly used in the industry is RINEX.
Read recommendations:
Next article:Selection of GPS hardware architecture
Related Information
gps vehicle tracker wholesaler
2023-04-11gps tracker for bike
2023-04-114G GPS Tracker custom
2023-04-23Magnetic gps tracker wholesaler
2023-03-16Asset GPS Tracker
2023-04-11Car gps tracking wholesale
2023-04-23Magnetic gps tracker sales
2023-04-23gps vehicle tracking
2023-03-16plug & play Obd gps tracker
2023-03-16mini gps tracker maker
2023-04-23G08L - 4inch Smart Tail Light Tracker
2022-06-20GF30 Magnet GPS tracker with Voice listen
2022-06-21G900LS-4G Car GPS Tracker
2023-10-06TK103B
2022-06-20Mini Sized GPS Tracker PCBA
2022-06-17What are the key points for purchasing in car GPS.personal gps tracker Solution
2023-06-16Introduction to GPS Navigation
2022-07-23Everyone knows about gps trackers, but what is LBS?
2022-09-15GPS system functions
2022-11-09Is it legal to use a gps tracker?
2022-09-17Gps speed limiter.GLONASS Satellite Navigation System
2023-10-11GPS vehicle tracking and dispatching function
2023-02-02Gps speed limiter.GPS signal
2023-11-14Domestic product function
2022-11-01Car GPS.obd-II port gps tracker Processing
2023-05-13GPS data.portable gps tracker Manufacturing
2023-05-20Xiaobian Xiaobian tells you the role of the truck installation of the Beidou positioning system.plug
2023-04-25GPS FFT algorithm
2022-11-10Analysis of GPS antenna principle
2022-12-02The GPS implementation plan has three phases
2022-10-13