How to install and place the GPS tracker with more accurate positioning and stronger signal

　　1. The installation location of the gps tracker should be selected

　　The GPS signal power of the gps tracker is very low, and the signal reception requirements are high, so there should be no metal shield between the antenna of the gps tracker and the sky. If there are metal objects close to it, it will seriously affect the GPS signal reception, so keep away from these metal objects.

　　In addition, gps trackers are electronic products, such as other on-board communication devices in the car, and the signals between them will interfere with each other. You will know when the gps tracker is close to the radio to produce the sound of Zlazila. So the devices are also far away from each other.

　　When choosing the installation location, pay attention to these two points and the signal will not be bad.

　　2. The angle of the GPS tracker should be chosen well

　　When placing it, the antenna of the GPS tracker should be facing up, and the GPS satellite signal is vertically downward. If the side of the antenna that receives the GPS signal is facing down, the sub-signal reception will definitely be discounted. Generally, the locator device will indicate on the surface that you should face the antenna up.

　　The above are the two issues that should be paid attention to when installing and placing the GPS tracker. At the same time, it would be perfect if we could pay more attention to dustproof, dustproof, waterproof, high and low temperature, and shockproof.

Read recommendations:

GPS Tracker custom

car gps tracker wholesaler

GF20-Mini Magnet GPS Tracker

Fleet management.Analysis of users' demand for monitoring services of car GPS positioning systems

Application of GPS